The RXR - Q200L Flood - drainage and Demolition Integrated Robot is
powered by a gasoline engine and driven by a hydraulic system. It
can be operated via remote wireless control / wired control /
vehicle - body control. This integrated robot is applicable to
flood - drainage rescue in environments such as urban garages,
subway stations, tunnels, culverts, and narrow urban roads. When a
flood disaster occurs in a city, causing serious water accumulation
in underground garages, subways, tunnels, etc., the flood -
drainage and demolition integrated robot can quickly carry out
flood - discharge rescue. This product has functions such as
drainage, audio - video reconnaissance, water leakage detection,
and disaster - area environment reconnaissance. The accompanying
hose reel vehicle of this product can simultaneously wind 2 reels
of DN200 large - diameter hoses. The water pump equipped on the
robot has large - diameter ports for sewage discharge, water
release, and maintenance.
|
- Remote - control start:Unobstructed by other objects, the remote -
control buttons can reasonably adjust the power and freely control
the flow rate to meet the actual on - site needs.
- Amphibious chassis:It adopts a 6×6 wheeled chassis, is
hydraulically driven, equipped with vacuum tires, and additionally
equipped with an underwater thruster to increase the traveling
efficiency in water. It is amphibious and can travel on all
terrains.
- Diverse functions and wide application scenarios:
- Water supply: It can supply water to fire trucks and can also be
used as a water - intake module for remote water supply. It can
enter the water without a water - intake platform, with a large
flow rate and fast water - supply speed.
- Flood - drainage: It has a large drainage flow rate (720T/H), a
long drainage distance, is easy to operate, and can be quickly
deployed.
- Strong adaptability: It has low requirements for water quality, can
drain sewage and mud, and can pass through 25 - mm particles.
- Equipped with an electric large - diameter hose reel vehicle:The
water - supply and drainage robot is equipped with a large -
diameter hose reel and release vehicle. It adopts an electric rapid
- laying system, which is simple to operate and highly practical.
It solves the inconvenience of manual hose laying and recovery,
thus saving rescue time.
- Remote relay:If the water - supply distance is too long, a water -
supply and drainage robot can be used for intermediate power -
boosting.
- Water - area leakage alarm device (optional):The leakage alarm
monitors the leakage situation of the water area where the robot is
located in real - time and gives an alarm response.
- Reserved hydraulic interface:It can be externally connected to
demolition tools such as a hydraulic circular saw.
- Access to the robot networked cloud platform (optional)Real - time
status information such as the robot's position, battery level,
audio, video, and gas - environment detection information can be
transmitted to the cloud via 4G/5G network, and can be viewed on
the background PC and mobile devices.
- Configuration of a comprehensive water - rescue monitoring device
(optional)
|
3.Main Technical Indicators 3.1 Robot as a Whole- Reserved hydraulic output interface
- Drive form: Hydraulic drive
- Adopts amphibious vacuum tires
- Can be remotely controlled. The remote control has a fuel - tank
liquid - level alarm reminder.
- Remote - controlled lifting water intake, which can be used for low
- water - surface flood - drainage.
- Maximum drainage volume: ≥207.3L/s
- Overall dimensions: ≤ length 2150 * width 1430 * height 1330mm
- Total weight: ≤795.9kg
- Tractive force: ≥4900N
- Load - bearing capacity: ≥350kg
- Traveling speed: ≥5km/h
- Chassis form: 6 X 6 drive mode, hydraulic vacuum - tire chassis
- Engine power: ≥40hp
- Minimum ground clearance: ≥155mm
- Obstacle - crossing height: ≥307mm
- Ditch - crossing width: ≥653 mm
- Traveling speed: 0 - 5Km/h, stepless speed change;
- Climbing angle: ≥35°
- Side - tilt angle: ≥32°
- Turning radius: 1200mm
- Remote - control distance: ≥1031m
- Lift height: ≥7m
- Water - intake depth: ≤157mm
- Continuous working time of the robot with a full tank of fuel: ≥8h
- Water - quality requirements:
- It can suck and discharge liquid containing impurities with a
maximum solid - particle diameter of 25mm. By replacing the filter
screen, it can suck and discharge liquid containing impurities with
a maximum solid - particle diameter of 3mm.
- Flow - rate requirement: Under the condition of 0 - meter suction
depth, the drainage volume is above 200L/s; the maximum drainage
distance is 500m.
- Pipe diameter: Equipped with DN200mm double water inlets; DN200mm
double water outlets
3.2 High - flow Pumps of the Robot (2 units, each with the
following parameters)- Weight: 27kg
- Working pressure: 13.8Mpa
- Input hydraulic flow rate: 30 - 40L/min
- Drainage volume: 360 m³/h
- Diameter: DN200
- Oil - pipe joint: 3/4in flat - face quick - connector
3.3 Hydraulic System of the Robot- Engine: Power 40HP@3600rpm, displacement 993cc
- Main pump: Displacement 11.5ml + 11.5ml; rated pressure 250bar +
250bar, rated speed 4000 rpm
- System pressure: 140bar
- System and control mode: Semi - closed quantitative hydraulic
system, controlled by an electric - control on - off valve +
electric - control proportional valve
- Travel drive: Number of drives 6; nominal displacement 475mL/r,
continuous speed 160r/min, continuous maximum torque 1085NM, rated
working pressure 175bar; maximum input flow 75L/min;
3.4 Audio - video Sensing of the Robot (optional)- Number and configuration of cameras: The video system consists of 4
fixed high - definition infrared cameras on the body.
- Camera illumination: The cameras on the body can provide clear
images under a low illumination of 0.001LUX, with dynamic anti -
shake. The cameras should be able to effectively and clearly
collect the on - site situation at zero illumination and display it
on the LCD screen of the operation terminal.
- Camera pixel: Million - high - definition image, resolution 1080P,
wide - angle 60°
- Camera protection level: IP68
3.5 Configuration Parameters of the Remote - control Terminal- Operating temperature: - 20~70℃
- Shell material: High - strength engineering plastic
- Body size: 260mm * 160mm * 100mm
- Protection level: IP69, anti - fall, anti - pressure, waterproof
- Working time: ≥8h
- Travel control function: Through 2 single - axis industrial
joysticks, the robot can be flexibly operated for forward,
backward, left - turn, and right - turn.
- Auxiliary tool: Shoulder strap for the handheld remote - control
terminal
- On - board controller: An industrial computer is embedded in the
vehicle - body end. It can operate actions such as water pumping,
traction, and lighting, and can also query fault information such
as oil pressure, liquid level, and battery level.
- Wired remote - control: Equipped with a wired remote - control for
emergency use when the wireless signal is interfered in a strong -
magnetic environment for the mobile robot.
3.6 Internet Function (optional)- GPS function: GPS positioning, and the trajectory can be queried.
- Emergency Fire - fighting Equipment Cloud Management Platform
System (optional):
- The equipment can be connected to the equipment cloud management
platform for remote monitoring:The equipment cloud management
platform can remotely monitor equipment information, gas and video
information, conduct statistical analysis, automatically verify the
validity period of the equipment, automatically remind of expired
equipment information statistics, and conduct comprehensive
management and application to ensure the timeliness of the
equipment.
- The equipment can be connected to the equipment cloud management
platform for visualization:It has functions such as equipment
visualization on a large screen, graphic analysis, data -
fluctuation graph display, data - scrolling display, a
comprehensive display area, equipment utilization rate statistics.
It can analyze the data trend and assist in decision - making in
real - time, display multiple graphics, complete the common display
of various products, and meet special needs.
- The equipment cloud management platform supports one - click remote
firmware upgrade of the equipment.
- The equipment can be connected to the PC and APP ends of the
equipment cloud management platform for display, and the data is
automatically synchronized in real - time.
- The equipment can be connected to the equipment cloud management
platform: Through a smartphone, tablet, or other terminals, basic
information such as the name, date, contact person, model,
parameters, category, unit, and picture of the equipment can be
queried. And statistics of various data such as the number of uses,
the number of issues, the number of borrows, the number of repairs,
and the number of scrapped can be carried out, and the equipment
can be statistically analyzed online in real - time.
- Through the equipment cloud management platform, operations and
queries of historical information such as addition, modification,
deletion, borrowing, issue, record, fault, repair, and scrapping of
the equipment can be carried out.
- Through the equipment cloud management platform, the terminal can
query the equipment usage situation of units at different levels,
and can be deployed and built across multiple levels, regions, and
provinces. The dynamic dispatching and monitoring of the equipment
can be carried out in real - time.
3.7 Comprehensive Water - rescue Monitoring Device (optional)- Video transmission: Two - way voice call, 2.4GHz wireless chip Wi -
Fi connection, mobile APP, 1080P ultra - clear picture quality,
snapshot recording, backup storage
- Intercom and sound - amplification: Two - way call function, call
distance ≥3000 meters
- Sound - amplification function: Sound - amplification distance ≥500
meters
- Network transmission: GPS + Beidou + WIFI + LBS positioning;
positioning accuracy error ≤3 meters
- Lighting system: No light source loss, wide irradiation area, good
road - paving feeling, low power consumption
- Volume: 175x132x60 mm
- Weight: 1.27 kg
- Working time: 8 h
3.8 Electric Large - diameter Hose Reel VehicleFeatures: Enables rapid laying and recovery of hosesOverall
dimensions: length * width * height: 1780 * 1100 * 1360mmCurb
weight: 315kg (excluding hoses)Drive type: ElectricBattery
capacity: 32AhTotal hose laying and recovery: 150 metersCan
simultaneously wind 2 reels of large - diameter hosesLaying /
winding speed: 0.5m/sTraveling speed: 10km/hThe wound hoses can be
completely disassembled (optional) |
